In this detailed tutorial, we’ll guide you through the process of fitting a new saw blade on the Trajan 125 band saw. This straightforward method will help you quickly replace your bandsaw blade, enhancing your machine’s efficiency.
Safety First: Preparing for Installation
Before starting, prioritize safety by:
- Disconnecting the band saw from power.
- Wearing appropriate safety gear, like safety glasses and gloves.
Removing the Old Bandsaw Blade
To remove the existing bandsaw blade from your Trajan 125:
- Use a Phillips screwdriver to unscrew the back plate.
- De-tension the machine while holding the blade in place.
- Manoeuvre the blade around the wheels and casing.
- Gently tap the blade to disengage it from the guides.
- Set aside the old blade.
Installing the New Blade
With the old blade removed, follow these steps to install the new one:
- Carefully unroll the new blade, keeping it directed away from you.
- Ensure the blade’s teeth are correctly oriented as per your machine’s instructions.
- Feed the blade through the guides and around the wheels, ensuring it sits snugly against the wheel ridge.
- Tension the blade using the hand-operated knob until fully tight.
- Test the machine with a few rotations to check for any blade issues.
Reattaching the Back Plate
Finally, secure the machine by:
- Switching off the band saw.
- Reattaching the back plate using the screws and screwdriver.
Conclusion
With these steps, you’ve successfully installed a new blade on your Trajan 125 band saw. For optimal blade and speed settings for different Materials visit our detailed article.
